MSD OCM | Stage 2 MSD 400bhp High Torque Remap + 50 BHP + 90 NM | Focus RS MK3
MSD400 Package (up to 400PS)
This calibration is designed to work with the factory hardware and a free flowing air filter to help with the extra air flow.
This calibration further increases the engines power over our MSD 380, increasing the torque output to 560 NM low down and extending the power higher up the rev range to 400PS.
This isn’t just headline power either, flexibility and reliability are our speciality so the ECU's incredible torque model is fully retained ensuring factory driveability with no hesitations, surges or hiccups in the power delivery.
Naturally, as with all MSD power upgrades, all necessary safety limits and protection strategies are re-profiled and enhanced in order to allow the extra performance whilst retaining a strong, O.E Level of engine protection.
Please be aware that power figures don’t tell the whole story with these management systems, making extra power is easy, but many companies completely disable the torque control and most of the protection strategies in order to do so and this can cause driveability and longevity concerns with often massive boost levels required to make the power.
Additional hardware needed:
- None.
Total cost including labour and vat = £499.00
We also recommend the following optional items to complement the conversion:
- A stronger compressor bypass valve. Plumb Back or Dual
- A step colder spark plug grade is highly recommended. We recommend either:
- These NGK
- These Denso
Standard Calibration Features
- Improved idle stability
- Factory drive-ability under all conditions.
- Launch control RPM set-point optimised
- All engine protections remain in place (See safety tab)
- Fords inferred octane system is retained and operates to factory spec.
Personalisations Available: (At time of programming)
- Power switchable with sport mode button. (Full tuned power in sport mode, less in normal mode)
- Stop / Start disable.
- Eco shift light disable.
- MSDEnhanced "Pops & Burbles" sound and RPM threshold.
- MSDExtreme "Pops & Burbles" sound available for vehicles with no catalyst.
- Enable or Disable "Pops & Burbles" in Normal and Sport modes as required.
PLEASE NOTE THIS IS A WORKSHOP FITTED REMAP
PLEASE CALL US ON 01268 906380 ON PURCHASE FOR ADDITONAL ADD-ONS AND ANY HELP!
