Err

Shop
Search Your Cart
 FOCUS MK3 1.0 125PS OCM EVOLUTION CHIPS REMAP STG 1 & 2
£ 249.00
This package lifts the power restrictions from within the ECU and enhances the power output. - Motorsport Development
  • Evolution Chips OCM140-165 ECU calibration
  • Full Engine Management Diagnostics Check
  • BHP Increase +20
  • Torque Increase (NM) +35
  • For Facelift & Pre Facelift Models S/Stop
  • Workshop fitted only
 FOCUS RS MK3 STAGE 1 OCM EVOLUTION CHIPS REMAP
£ 399.00
This package lifts the power restrictions from within the ECU and enhances the power output very mildy to 520NM and 360PS thus avoiding putting any undue strain at all on the powertrain. - Motorsport Developments
  • Evolution Chips OCM360 ECU calibration
  • Full Engine Management Diagnostics Check
  • BHP Increase +15
  • Torque Increase (NM) +70
  • Workshop fitted only
 FOCUS RS MK3 STAGE 2 OCM EVOLUTION CHIPS REMAP
£ 449.00
This package lifts the power restrictions from within the ECU and further enhances the power output to 550NM and 380PS - Motorsport Developments
  • Evolution Chips OCM380 ECU calibration
  • Full Engine Management Diagnostics Check
  • BHP Increase +35
  • Torque Increase (NM) +90
  • Workshop fitted only
 FOCUS RS MK3 STAGE 3 OCM EVOLUTION CHIPS REMAP
£ 499.00
This package lifts the power restrictions from within the ECU and further enhances the power output to 550NM and 400PS - Motorsport Developments
  • Evolution Chips OCM400 ECU calibration
  • Full Engine Management Diagnostics Check
  • BHP Increase +50
  • Torque Increase (NM) +90
  • Workshop fitted only
 FOCUS RS MK3 STAGE 4 OCM EVOLUTION CHIPS REMAP
£ 549.00
This package lifts the power restrictions from within the ECU and further enhances the power output to 550NM and 400PS - Motorsport Developments
  • Evolution Chips OCM400 ECU calibration
  • Full Engine Management Diagnostics Check
  • BHP Increase +70
  • Torque Increase (NM) +90
  • Workshop fitted only
 FOCUS RS ST MK2 STAGE 1 OCM EVOLUTION CHIPS REMAP
£ 299.00
This package lifts the power restrictions from within the ECU and enhances the power output. -Motorsport Development
  • Evolution Chips OCM260 ECU calibration
  • Full Engine Management Diagnostics Check
  • BHP Increase +35
  • Torque Increase (NM) +130
  • Workshop fitted only
 FOCUS ST 250 MK3 STAGE 1 OCM EVOLUTION CHIPS REMAP
£ 299.00
This Stage 1 lifts the power restrictions from within the ECU and enhances the power output. - Motorsport Developments

  • Evolution Chips OCM280 ECU calibration
  • Full Engine Management Diagnostics Check
  • BHP Increase +30
  • Torque Increase (NM) +80
  • Workshop fitted only
 Ford EcoBoost 1.0 3 Cylinder Turbo H-Beam PEC Steel Connecting Rods
£ 359.99
  • 4x PEC H-beam forged steel connecting rods
  • 8x ARP 2000 series / ARP custom age 625 connecting rod bolts (choose from options)
  • 1x ARP fastener assembly lubricant
  • 1x PEC connecting rod installation guideline sheet
 Ford Fiesta ST 180 1.6 Ecoboost Turbo Athena MLS Head Gasket
£ 139.95
Athena MLS Headgaskets consist of 2-5 layers of steel sheets of different compositions and covered by an elastomer layer that gives excellent sealing properties. Beadings around the combustion chambers and oil/coolant passages increase the local sealing pressure 
 Ford Fiesta ST 180 1.6 Ecoboost Turbo Wossner Forged Piston Kit
£ 820.80
(-8.00%) £ 755.14
Wössner are regarded by Europe’s leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress’s of competition life
 Ford Fiesta ST 180 1.6 Ecoboost Turbo Wossner Low Compression Forged Piston Kit
£ 820.80
(-8.00%) £ 755.14
Wössner are regarded by Europe’s leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress’s of competition life
 Ford Focus RS Mk1 2.0 16v Turbo H-Beam PEC Steel Connecting Rods
£ 485.10
  • 4x PEC H-beam forged steel connecting rods 
  • 8x ARP 2000 series / ARP custom age 625 connecting rod bolts (choose from options)
  • 1x ARP fastener assembly lubricant
  • 1x PEC connecting rod installation guideline sheet
 Ford Focus RS Mk3 2.3 16v Ecoboost Turbo PEC Steel Connecting Rods
£ 485.10
  • 4x PEC H-beam forged steel connecting rods
  • 8x ARP 2000 series / ARP custom age 625 connecting rod bolts (choose from options)
  • 1x ARP fastener assembly lubricant
  • 1x PEC connecting rod installation guideline sheet
 Ford Focus ST 2.5 Duratec I5 Turbo Wossner Forged Piston Kit
£ 779.99
Wössner are regarded by Europe’s leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress’s of competition life. 
 FORD MONDEO 1.6L 16V ECOBOOST 180 STAGE 1 AND 2 EVOLUTION CHIPS REMAP
£ 249.00
This package lifts the power restrictions from within the ECU and enhances the performance and drivability of your vehicle - Motorsport Development
  • Evolution Chips OCM210 & OCM230 ECU calibration
  • Full Engine Management Diagnostics Check
  • BHP Increase Varies With Stage
  • Torque Increase (NM) Varies With Stage
  • This remap is for models 1.6L EcoBoost 2011 >
  • Workshop fitted only
 FORD MONDEO 2.5 T 20v i5 STAGE 1 EVOLUTION CHIPS REMAP
£ 249.00
This package lifts the power restrictions from within the ECU and enhances the performance and drivability of your vehicle - Motorsport Development
  • Evolution Chips OCM260 ECU calibration
  • Full Engine Management Diagnostics Check
  • BHP Increase + 40
  • Torque Increase (NM) + 95
  • This remap is for models 2007 - 2011 2.5l Turbo
  • Workshop fitted only
 FORD TRANSIT CONNECT 1.5L & 1.6L 8V MK2 TDCI 2014 Onwards STAGE 1 OCM EVOLUTION CHIPS REMAP
£ 249.00
This package lifts the power restrictions from within the ECU and enhances the performance and drivability of your vehicle - Motorsport Development
  • Evolution Chips ECU calibration
  • Better MPG Better Performance
  • Full Engine Management Diagnostics Check
  • BHP Increase up to + 30
  • Torque Increase up to + 50 (NM)
  • This remap is for models 1.5L & 1.6L 8v TDCi 2014 > Onwards
  • Workshop fitted only
 STAGE 1 EVOLUTION CHIPS OCM REMAP 140PS
£ 249.00
  • Smooth power delivery
  • Fitted at OC Motorsport only
  • 150 bhp when fitted with air filter
  • Suits 140ps Ecoboost only
  • Available with De-Cat light option
 STAGE 3 EVOLUTION CHIPS OCM REMAP 125PS
£ 349.00
  • Smooth power delivery
  • Fitted at OC Moorsport only
  • 165 bhp when fitted with all nesessary hardware
  • Suits 125ps Ecoboost only
  • Available with De-Cat light option
£ 184.32
Turbosmart Ford Fiesta ST Internal Wastegate Actuator 
(2.0) Timing Chain
£ 85.99
  • (2.0) Timing Chain
(2.0L) Main Bearing Set (Std) Grade B
£ 99.99
  • (2.0L) Main Bearing Set (Std) Grade B
(2.0L/2.3L) Dry Sump Kit (Internal Pump) 3 Stage Extreme Applications
£ 1,764.95
  • Dry Sump Kit (Internal Pump) 3 Stage Extreme Applications
(2.0L/2.3L) Exh Valve OE Size Each
£ 13.40
  • (2.0L/2.3L) Exh Valve OE Size Each
(2.0L/2.3L) Inlet Valve OE Size
£ 13.40

  • (2.0L/2.3L) Inlet Valve OE Size

(2.3L) Timing Chain - Ranger Style
£ 64.99
  • (2.3L) Timing Chain - Ranger Style
1.0L Eco Boost Pro Hose silicone Induction hose upgrade
£ 74.50
(-6.71%) £ 69.50

Available in the following colours

  • Frozen White
  • Bright Red
  • Gloss Black
  • Bright Blue
  • Pink
  • Yellow
  • Green
  • Grey

Bring your Fiesta 1.0 '100ps and 125ps' Eco Boost  engine bay to life with Pro-Hose, the Professional choice


1.0L Ecoboost secondary induction hose
£ 69.50
(-6.55%) £ 64.95

Removes Fords restrictive secondary induction hose with a smooth large internal bore silicon hose upgrade.

Made with a large 60mm bore inner diameter and made to fit perfectly the secondary induction hose upgrade is available in a variety of colours.

  • Frozen White
  • Bright Red
  • Gloss Black
  • Bright Blue
  • Pink
  • Yellow
  • Green
  • Grey

Bring your Fiesta Eco Boost  engine bay to life with Pro-Hose, the Professional choice.

2.0/2.3 Duratec 200 Spec Camshaft Set
£ 419.95
(-5.00%) £ 398.95
  • No need to swap valve springs
  • Simple DIY fitting.
  • No shimming required

Airtec Alloy top induction pipe for MK2 Focus ST255 and Volvo C30 T5
£ 139.95
(-7.15%) £ 129.95

Available in Satin Silver (Motorsport Style Finish), Polished alloy or Pro-Series Black

Fits all Focus ST 2005 to 2011

Airtec Big Boost Pipe Kit
£ 249.95

Big boost pipe kit for the Fiesta ST 180.

The kit includes: 2 hard pipes, 4 Pro Hose silicone hoses & free jubilee clips.

This kit is designed for the modified fiesta ST 180. All Pipe's have swayed  ends to stop the pipes blowing off.
 
2.5" bore pipework.
Comes in alloy finish.
AIRTEC Fiesta mk7+ 7.5 1.6 Diesel front mount Intercooler
£ 349.00
  • 1 x single pass 50mm core Intercooler with flowed end tanks
  • Comes with full fitting instructions & pipe work 
  • No cutting bumper with our intercooler kit 
  • Un-Beatable value for money
  • Available in Satin Black or Polished Alloy
  • Airtec 3 year unlimited mileage warranty
  • Fitting will take 1-2 hours depending on mechanical skill
Airtec Focus Mk2 ST 225 & RS300 40mm core alloy radiator upgrade
£ 495.00

Airtec opted for a huge 40mm core normally found on our Cosworth radiators it was perfect! but due to its size we needed to make the fitting more adjustable. We opted for adjustable billet lower locating pegs, these help position & fitting @ the same time stop twisting of the radiator while trying to fit.

 

 

A must for fast road & Track day Focus ST's & RS Models

Airtec Focus ST Mk2 Stage 2 250bhp to 350bhp - Gen3 with RS Style Air Ram scoop & Bigger core
£ 299.95

We have given our massively popular Gen3 a modified scoop from our RS Intercooler, creating the Stage 2 Gen3 RS which Forces the Air directly into the core for even more cooling power!

Now been tested on rolling road with amazing results.

Bolt on Power, not extra parts required to fit, connects to standard size ST 2" Boost hoses


Airtec Front mount Intercooler for Focus MK3 RS
£ 494.85

Airtec huge front mount intercooler for MK3 Focus RS.

The Airtec intercooler is the only off the shelf intercooler that uses a 100mm deep core! We use this core only in the most extreme coolers, we name the 100mm core 'GobStopper' due to it's amazing cooling properties.

Core Thickness 100mm 'this is used on a syvecs powered 800bhp MK2 Focus RS with an intake temp of 34 degrees'

Height 220mm

Width 896mm

AIRTEC front mount intercooler for Focus MK3 ST-Diesel
£ 295.00

AIRTEC front mount intercooler for the Focus ST MK3 Diesel.

Designed to keep air shutters in place, to prevent cooling fans running on.

Fabricated in the UK at Airtec HQ.

Intercooler made to order, please allow 7-10 days.

AIRTEC part no: ATINTFO43

AIRTEC intercooler for Transit Connect M Sport
£ 425.00

Airtec intercooler for the Transit Connect M Sport.

Airtec has now added a great addition to it's growing range of performance intercoolers, in the way of this huge front mount for the Transit Connect M Sport

Available for pre-order, please allow 7-10 days before delivery

AIRTEC Motorsport 2.5-inch Big Boost Pipes with 70mm Cold Side for Mk2 Focus RS and ST
£ 330.00

Airtec Motorsport now brings you the 2.5 Inch big boost pipe kit.

The 2.5" big boost pipe kit is a must for all remapped RSs, Everything you need is included in the kit.

The most cost effective way to get a super light weight 2.5" Boost pipe upgrade made from alloy rather than the more expensive Stainless Steel option.

Airtec Motorsport Billet quick Shift Fiesta ST180
£ 64.95

AS Performance Short Shift Kit. Reduce your stock shift throws with two different positions, ranging from 15% or 25%. Offering 2-positions truly allows the user more options to fine tune their shift throws!

Fits Fiesta ST 180 and Focus MK3 1.6.

FREE shipping!

Airtec Motorsport Fiesta MK6 MK7 Torque Mount Roll Restrictor
£ 109.95
  • 2 x Polyurethane bush inserts
  • CNC from solid billet alloy, bead blasted and anodised in satin Black
  • Reduces engine movement and wheel hop on hard acceleration
  • A must for modified cars
  • Replaces original ford cast alloy and rubber torque mount
  • Faster gear changes due to less engine movement
  • Can be fitted in under 30 minutes with no special tools required
AIRTEC Motorsport Fiesta MK7 boost gauge kit
£ 99.95
  • Turbosmart backlit boost gauge (Bar or PSI)
  • Gauge securing ring
  • Vacuum hose
  • Bracket and bolts
  • CNC vacuum take off (Fits onto inlet manifold)
AIRTEC Motorsport Fiesta ST 180 oil cooler kit
£ 295.00

AIRTEC Motorsport are proud to offer the oil cooler kit for the Fiesta ST 180

Long overdue but it’s been worth the wait, making every part of our AIRTEC Motorsport oil cooler kit unique and finished to a stunning level of quality.

Grill mounted to achieve maximum cold airflow and fits either side of grill as not to affect cold air feed for air filters.

Kit Includes.

  • 13 row high performance AIRTEC motorsport oil cooler
  • Aeroquip 90 degree Black anodised fittings with Black Pro-Lite Oil hose
  • Billets anodised Black hose line seperators x 4
  • Gearbox mounted hose securing bracket finished in ProSeries Black

Designed to fit with AIRTEC stage 3 intercooler & suppled with a bracket for cars running standard or other aftermarket intercooler!

Airtec Motorsport Fiesta ST180 Decat
£ 195.00
(-7.72%) £ 179.95
  • Expect more popping and a deeper exhaust note. Gain up to 10+ bhp (Depending on your cars stage)
  • Includes OCM Fitting kit
AIRTEC MOTORSPORT FIESTA ST180 QUICKSPOOL TUBULAR MANIFOLD
£ 495.00

Performance Tubular manifold for Fiesta ST 180.

Perfect for fast road or race. Best performance when used with stage 3-4 Fiestas.

The tubular manifold for the Fiesta ST 180 will see best performance gains when used with a stage 3 setup, hybrid or big turbo setups will see the best imrpovements.

New Designed Fiesta ST180 Stock Location Equal Length Tubular Manifold
Airtec Motorsport Fiesta ST180 Top Induction Pipe
£ 134.95

Airtec Motorsport Fiesta ST180 top induction pipe.

Replace your standard Fiesta ST 180 plastic top induction pipe with our AS performance alloy top pipe. 
Available in Pro Series Black or Satin Silver.

Can be fitted with the stage 2 Airtec Motorsport induction kit.

AIRTEC Motorsport Hot Side Lower Boost Pipe for Fiesta ST180
£ 89.95

AIRTEC Motorsport hot side lower boost pipe for Fiesta ST 180.

Designed to increase airflow on the Fiesta ST 180 as a replacement of the restrictive standard boost pipe, the AIRTEC Motorsport hot side boost pipe creates a much smother air flow by replacing the restrictive bends and smaller diameter pipe.

Features:

  • Swaged ends to prevent blowing of on bigger power cars.
  • Will work perfect with standard or re-mapped Fiesta ST's.
  • To fit with both, stock and AIRTEC intercooler.
  • Resonator delete.
  • Fitting takes less than 30 minutes to install and fits to standard boost hoses.

52mm pipe throughout, compared to the restrictive 42mm resonated standard pipe.

AVAILABLE ONLY IN SILVER FINISH

Registered Design Right number: 6033436

AIRTEC part no: ATMSFO77

AIRTEC MOTORSPORT LARGE BORE INTAKE ELBOW HYBRID ST180
£ 99.95
Large Bore Intake Elbow for Stage 2-3 Hybrid Fiesta ST180 Turbos 

AIRTEC Motorsport turbo induction elbow for Fiesta ST 180.

Direct replacement of the stock turbo induction pipe. Only company supplying with a gasket.

       

Airtec Motorsport Stage 2 Induction Kit Focus MK3 ST Facelift / Pre-Facelift
£ 295.00

Stage 2 Induction Kit for the Focus ST 250

The new design Stage 2 induction kit that works perfectly with the standard Focus ST 250

Expect to see gains of 5-10bhp compared to the original Airbox.

Enhanced induction sound, great looks and loud re-circulation dump-valve noise

AIRTEC MOTORSPORT TORQUE MOUNT ROLL RESTRICTOR Fiesta MK7 ST180 & ST200
£ 109.95

This is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement. This part will fit the Fiesta 1.0 EcoBoost, ST180, ST200 & Fiesta ST150

 


AIRTEC MOTORSPORT TORQUE MOUNT ROLL RESTRICTOR Fiesta MK7 ST180 & ST200
£ 109.95

This is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement. This part will fit the Fiesta 1.0 EcoBoost, ST180, ST200 & Fiesta ST150

 


AIRTEC MOTORSPORT TORQUE MOUNT ROLL RESTRICTOR Fiesta MK7 ST180 & ST200
£ 109.95

This is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement. This part will fit the Fiesta 1.0 EcoBoost, ST180, ST200 & Fiesta ST150

 


Airtec 'Race' RS Mk2 remote oil cooler kit - Lower grill mounted (Right hand side)
£ 395.00

The Airtec 'Race' oil cooler kitis comprehensive and every part isfinished to aextremely highlevel of quality

Designed for RS owners pushing the limits, serious Fast Road & Track use

AIRTEC STAGE 1 FIESTA 1 LITRE ECOBOOST FRONT MOUNT INTERCOOLER UPGRADE
£ 295.00
Our Stealth Intercooler Black with no Writing for the Ultimate Performance With Little Visibility
AIRTEC STAGE 1 FIESTA ST180 ECO BOOST FRONT MOUNT INTERCOOLER UPGRADE
£ 349.00
The Stage1 ST180 Eco Boost intercooler features our proven race quality Bar 'n' Plate core, this core has always proved to out perform it's lighter weight Tube and Fin competitor. The new ST Fiesta is a great car and why not make it even better and fit the best, fit AIRTEC.
Airtec Stage 1 Intercooler Focus ST 225bhp to 325bhp - Gen3 Airtec 60mm core
£ 249.95

Airtec, Improved power, Improved Torque & Improved looks!

Now been tested on rolling road with excellent results @ torque of the devil, Click more to view results. Easy fit! In stock easy BHP bolt on upgrade!

AIRTEC Stage 2 - 375bhp to 700bhp - 65mm Core Intercooler Focus RS MK2
£ 493.99

Tested Independently tested by Fast Ford Magazine

And also AIRTEC did their own tests on a Focus RS 546bhp car with amazing results!

694.8 BHP ROLLING ROAD TESTED!! AIRTEC Stage 2 Intercooler & the market leading 2.5" big boost pipe kit makes it a must upgrade for your 400+BHP Focus RS (Rolling road recorded unofficial 733 bhp/650 lbft, but moved on rollers @ end of run)
 
Designed for 400+bhp

AIRTEC STAGE 2 FIESTA 1 LITRE ECOBOOST FRONT MOUNT INTERCOOLER UPGRADE
£ 349.00
(-5.00%) £ 331.54
Airtec Front Mount Intercooler Featuring a Single Pass 50mm Core with Flowed End Tanks
AIRTEC STAGE 3 FIESTA ST180 ECO BOOST FRONT MOUNT INTERCOOLER UPGRADE
£ 549.00
The Stage 3 ST180 Eco Boost intercooler features our proven race quality Bar 'n' Plate core, this core has always proved to out perform it's lighter weight Tube and Fin competitor. The new ST Fiesta is a great car and why not make it even better and fit the best, fit AIRTEC.

Airtec has now taken the Intercooler on the ST180 to a whole new level, with the step core design offering a 85mm thick lower section and a 40mm thick upper section 'The Double Decker' the intercooler has been design for cars running hybrid turbo's and big turbo conversions where fitted. 

Airtec Stage 3 Intercooler Upgrade for Focus ST 300bhp to 425bhp
£ 499.00
  • Air-Ram Scoop, forces Air directly into core of intercooler
  • Huge high flow 60mm core, lower ACT Temps, 
  • Smooth flow end tanks, no welds, means no leaks
  • Airtec logo brackets
  • Increased BHP & torque Figure
  • Pro-Series Black
  • Strongest Intercooler available, backed up by our 3 year warranty. 
  • Cold & Hot side Pro hose joiners, available in choice of colours
Airtec's Mondeo Mk4 2.5 Turbo Petrol (XR5) / Ford S-Max 2.5T petrol front mount Intercooler upgrade
£ 369.00
Comes with full fitting kit and instructions included, fitting takes 1 -2 hours. Only basic tools required.

Airtec's latest creation is this intercooler for the Ford S Max 2.5 Turbo Petrol, they have now changed the total design with new high flow 60mm core and Angled flowed end tanks, which in turn has increased power, torque & also lowered ATC Temps, Yes its really that good.